Minefield

Minesweeper Patterns: 1-1, 1-2-1 and 1-2-2-1 Explained

Learn the key mine-sweeping patterns, including 1-1, 1-2-1 and 1-2-2-1, plus subtraction logic, and how to guess wisely when you must.

By The PlayNook team · 21 November 2026 · 4 min read

Mine-sweeping games have a reputation for being about luck. They aren't, mostly. Once you learn to read the numbers, the large majority of each board can be solved with pure logic, and a handful of recurring patterns do most of the work. This guide teaches those patterns with small diagrams.

In the diagrams below, grey squares are revealed numbers, dashed squares are still hidden, green ✓ marks a square we can prove is safe, and red ✹ marks a square we can prove is a mine.

Rule zero: what a number means

A number tells you how many mines are among the up-to-eight squares touching it, including diagonals. Two simple consequences solve a surprising amount of every board:

  • If a number equals its hidden neighbours, all of them are mines. A 2 with exactly two hidden neighbours means both are mines.
  • If a number already touches that many flags, all its other hidden neighbours are safe. A 1 next to a flagged mine has no more mines around it.

Most of your clicks will come from these two ideas. The patterns below handle the situations where neither applies directly.

The 1-1 pattern

Suppose you have two 1s side by side along a wall (or along the edge of a revealed area), with a row of hidden squares underneath.

The left edge of this diagram is the wall of the board. The left 1 touches only the two hidden squares directly below the pair, so exactly one mine lies in those two. The right 1 touches those same two squares plus the two squares to its right. It also needs exactly one mine, and that mine is already accounted for by the pair below. So the two extra squares on the right can't hold a mine. Both are safe.

The general lesson is powerful: when one number's area fits completely inside another's, subtract them. Whatever mines the smaller area must contain, the leftover squares of the bigger area contain the difference.

The 1-2-1 pattern

This is the most famous pattern in the genre. Along a straight edge you see a 1, a 2 and a 1, with hidden squares underneath.

The answer is always the same: mines under both 1s, and the square under the 2 is safe. Here's why. The 2 needs two mines among the three squares below it. If the middle square were a mine, then one of the outer squares would also have to be a mine, and that outer square would give its neighbouring 1 a total of two mines. That's too many. So the middle is safe, and the two mines go on the outsides.

The 1-2-2-1 pattern

A close cousin. Along a flat edge: 1, 2, 2, 1.

The result: mines under the two 2s, and the squares under the 1s are safe. You can check it with subtraction: the first 1 and the first 2 overlap, and the extra square the 2 sees must hold its second mine. The same happens from the right. Once you've seen this a few times you'll recognise it instantly.

Subtraction, in general

The 1-1, 1-2-1 and 1-2-2-1 patterns are all special cases of one idea: compare two neighbouring numbers. For any two adjacent numbers A and B:

  1. Work out each one's remaining mines (the number minus any flags already touching it).
  2. Find the hidden squares only A touches, only B touches, and both touch.
  3. If B's remaining count minus A's remaining count equals the number of squares only B touches, all of those are mines and all of A's private squares are safe.

That sounds abstract, but in practice it's quick: "this 2 sees one more square than that 1, and needs one more mine, so that extra square is a mine." With a little practice you'll do it at a glance.

Corners and the 50/50

Sometimes the clues genuinely can't decide. The classic example is two hidden squares in a corner, with numbers that each say "one of these two is a mine," and nothing else touching them. No logic can split them; it's a pure 50/50.

Good players handle this calmly:

  • Leave it until last. Solve everything else first. Sometimes another part of the board, or the total remaining-mine count, settles it after all.
  • Use the mine counter. Near the end, the number of mines left can rule out possibilities. If two separate unsolved areas each need "one or two" mines and only three are left, that's information.
  • Choose the best odds. If you have to guess elsewhere, a square far from any numbers on a sparse board is often less risky than a 50/50, because the overall density of mines is lower than 50%.

A routine that works

  1. Click somewhere near the middle. The first click is always safe and usually opens an area.
  2. Flag every obvious mine (numbers equal to their hidden neighbours).
  3. Click or chord around every number that's fully satisfied.
  4. When those run out, scan the border of the opened area for 1-1, 1-2-1 and 1-2-2-1 patterns.
  5. Still stuck? Try subtraction on each pair of neighbouring numbers.
  6. Only then, guess, and pick the safest option.

Follow this and you'll find that Easy boards become almost guess-free, and that losing on Hard is usually the result of a rushed click rather than bad luck.

Play it now

More guides

Minesweeper How to Play Minesweeper: Rules, Numbers and a Beginner Strategy A complete beginner’s guide to Minesweeper: what the numbers mean, how flags and chording work, how to start a board, and a simple strategy to win without guessing. 4 min read Sudoku X-Wing Sudoku Technique Explained (with Examples) How the X-Wing technique works in Sudoku, how to spot one in rows or columns, why it’s valid, and related patterns like the Swordfish. 3 min read Reaction time How to Improve Your Reaction Time: 9 Practical Tips Practical, realistic ways to get faster and more consistent reaction times for games and sports: practice, sleep, focus, warm-ups, equipment and anticipation. 3 min read